ブックタイトルTASCO CATALOG 2015

概要

TASCO CATALOG 2015

Airtight Test ToolsSAE Type Pressure Gauge for Airtight TestItem no. TA148AF-270◆Gauge Diameter...75φGauge Diameter...0～7MPaConnecting Port...1/4 Male SAESAE Type Pressure Gauge for Airtight TestItem no. TA148AF-370◆Gauge Diameter...100φGauge Diameter...0～7MPaConnecting Port...1/4 Male SAEBe sure that use these products with pressure up to 70% of Gauge full scale.Open/Close ValveOpen/Close Valve1/4 SAEItem no. TA382KA◆1/4 Female SAE (with Valve) x 1/4 MaleSAE◆Applicable for Nitrogen1/4 SAEwith Core Depressor1/4 SAEItem no. TA382KA-2◆5/16 Female SAE (with Core Depressor) x1/4 Male SAE◆Applicable for Nitrogen5/16 SAEwith Core DepressorHigh Pressure Hose(1/4 SAE Female x 1/4 Male)High Pressure Hose wit Valve(1/4 Female x 1/4 Male)High Pressure Hose Reelwit Valve 30mItem no.TA381KG-1TA381KG-5TA381KG-10TA381KG-20TA381KG-30Size1m5m10m20m30m◆Working Pressure...5500 kPa 797 PSI1/4 SAE( Straight ) x 1/4 SAE with 45°Core Depressor◆◆◆Item no.TA381KB-5Working Pressure...5500 kPa 797 PSIBoth saide 1/4 SAE ( Female ) StraightOne side with Valve and Core DepressorSize5mPressure RangeGauge DiameterConnecting Port◆◆◆Item no. TA381NTWorking Pressure...5500 kPa 797 PSI1/4 SAE Female with Valve and Core Depressor x 1/4SAE MaleLength...30m◆◆1 PieceFeature...Can make Service Port of 1/4 SAE without welding copper piple.Fitting with O ringWithout any job for tube end , you can connect copper piepes directlyinable to enhance workability.Besides, easy to work in narrow space.Fitting equipped with bulit-in Refrigerant Sevice ValveEnsure staible flow rate of refrigerant gas and prevent gas leackagewhile dissasembles a calmpItem no.Applicable sizeTA230EV-2 1/4 Pipe insert part x 1/4 SAE with CoreTA230EV-3 3/8 Pipe insert part x 1/4 SAE with CoreTA230EV-4 1/2 Pipe insert part x 1/4 SAE with CoreTA230EV-5 5/8 Pipe insert part x 1/4 SAE with CoreConnecting Mounting Screw Size...7/16-20UNF (SAE Male Screw)Valve Structure...ulit-in Valve for RefrigerantMaximum Working Pressure...4MPaFitting Material...BrassSeal Material...CR (Cholroprene Rubber)◆◆◆◆◆UsageTA230EV-2～5Can make Service Portof 1/4 SAEwithout welding copper piple.1/4 SAEwith Valve Core1Check pipe appearance 2Insert pipe 3Completing tighten pipeUsage◆Airtight Test and Pressure Test for Air Conditoner◆Airtight Test and Pressure Test for Refrigerator◆Airtight Test for Soldering partsBe sure that there is noscratch , burrs and eccentricon insertion part of pipe.Scratch or burrs may leadleackage.Without remove the nut,insert pipe until the pipe endhits fitting main body.After inserting pipe , tightennut lightly until pipe is notsipped by hand.After tighten nut lightly , usespanner/wrench to tighten nutuntil nut end touchs fittingmain body.Pipe connection is completed.25