ブックタイトルTASCO CATALOG 2015

ページ
6/56

このページは TASCO CATALOG 2015 の電子ブックに掲載されている6ページの概要です。
秒後に電子ブックの対象ページへ移動します。
「ブックを開く」ボタンをクリックすると今すぐブックを開きます。

概要

TASCO CATALOG 2015

R410AR32GAUGE MANIFOLDPRESSUREREFRIGERANT OILSERVICE SUPPORTCALIBERHOSE, PACKING& SEAL MATERIALCOMPOSITIONOF REFRIGERANTR410A/R32ROOM A/CSYSTEMHigh PressureDesigned pressure4.3MPaSynthetic Oil,Polyol Ester,Ether5/16 Flare1/2 UNF-20 Mt.HNBRHFC-proof nylonBlendedIts composition will changedepending on whetherit is in a liquid phase orin a gas phase.Compose impurities1.6 times higherwhen mixed.Has become larger.Have becomemore durable.Liquid controlof the refrigerantis required.R22ROOM A/CSYSTEMMiddle PressureDesigned pressure2.9MPaMineral OilSUNISO1/4 Flare7/16 UNF-20 Mt.CRR22- & R12-proofrubberPureThe pressure of the new refrigerant for the room A/C system R410A/R32 is 1.6 times higher in pressure than the conventional refrigerantR22. Therefore, the standard diameter of the system service port has been changed from 7/16 UNF-20 (1/4 flare) to 1/2 UNF-20 (5/16 flare) inorder to prevent system damage and personal injury due to mischarging.In addition, most of the types of refrigerant oil (synthetic oil) which are used for the HFC new refrigerant system are different substantiallyfrom the types of refrigerant oil (mineral oil) which were used for the conventional system. If the two different types of oil are mixed,impurities will be composed to cause system damage.If material for the conventional refrigerants is used as material of HFC refrigerant seals, cracks and melting will occur to cause gas leakage.It is necessary to use HFC-proof HNBR or material coated with a special type of nylon.R410A refrigerant is a blend of R125 and R32. Basically, it should be charged in a liquid phase in order to avoid composition change.R410A/R32 BALL VALVE MANIFOLDBALL VALVE ASSURES AND ENABLES A EASY AND ACCURATE JOB. CAN ALSO CHECK GAS BY LOOKING INTO THE SIGHT GLASS.R410A/R32 SaturationTemperature ScaleSpecial scale equipped to avoidconfusion with other refrigerants and toassure precision.Can see saturation temperature at aglance.Lo-30in.Hg~540PSI(Megapascal)Hi-30in.Hg~750PSI(Megapascal)Zero Adjustment ScrewCan adjust 0 point even with the gauge cover on.Ball Valve Open/Close Handle◇Easy to open & close handle.◇Can see how much is opened at a glance.◇Large port passage so can shorten the vacuum& charging operation time.Pressure Proof Sight GlassSight glass equipped for the control ofliquid refrigerants.R410A (Pink)/R32 (Blue)Refrigerant ColorPainted pink in order to avoid confusionof R410A with other refrigerants.abcdOpenHandlea. Teflonb. Ball valvec. O-ringd. HandleHalf-openClosedAir purging portwith valve corePort Specially for New Refrigerant R410A/R32Ball valveR410A/R32 5/16 SAE (UNF 1/2 ? 20 threads)Other refrigerants...1/4 flare (UNF 7/16 ? 20 threads)Each port has a cap attached to prevent air, impure substances from entering.Port Specially forNew Refrigerant R410A/R325/16 flare (UNF 1/2 ? 20 threads)Special Material forHigh Pressure Gas (HFC)Nylon Material specially made forhigh pressure gas (4 layer structure)Taper Gasket especiallyfor HFCIn order to comply with new HFCtype refrigerant, a new type ofmaterial called HNBR is used forgasket.3