ブックタイトルcatalog2017vol3

概要

catalog2017vol3

Airtight Test ToolsAIRTIGHT TEST TOOLSSAE Type Pressure Gauge for Airtight TestItem no. TA148AF-270◆Gauge diameter...75φSAE Type Pressure Gauge for Airtight TestItem no. Item no. TA148AF-370Item no.◆Gauge diameter...100φPressure range: 0~7MPaConnecting Port...1/4 Male SAEMpa display onlyPressure range: 0~7MPaConnecting Port...1/4 Male SAEMpa display onlyOpen/Close Valve1/4 SAEBe sure to use these products with pressure up to 70% of full scale gauge.Open/Close ValveItem no. TA382KA◆1/4 female SAE (with core depressor) x 1/4male SAE◆Applicable for nitrogen1/4 SAEwith Core Depressor1/4 SAEItem no. TA382KA-2◆5/16 female SAE (with core depressor) x 1/4male SAE◆Applicable for nitrogen5/16 SAEwith Core DepressorHigh Pressure Hose(1/4 SAE Female x 1/4 Female)High Pressure Hose wit Valve(1/4 SAE Female x 1/4 Female)High Pressure Hose Reelwith Valve 30mItem no.TA381KG-1TA381KG-5TA381KG-10TA381KG-20TA381KG-30Size1m5m10m20m30m◆Working Pressure...5500 kPa 797 PSI1/4 SAE( Straight ) x 1/4 SAE with 45°core depressor◆◆◆Item no.TA381KB-5Working pressure...5500 kPa 797 PSIBoth side 1/4 SAE ( Female ) straightOne side with valve and core depressorSize5m◆◆◆Item no. TA381NTWorking pressure...5500 kPa 797 PSI1/4 SAE female with valve and core depressor x 1/4 SAEmaleLength...30mFitting with O ringTA230EV-2 ~ 5Item no.Applicable sizeTA230EV-21/4 tube insert part x 1/4 SAE with CoreTA230EV-3 3/8 tube insert part x 1/4 SAE with CoreCan make service portTA230EV-4 1/2 tube insert part x 1/4 SAE with Coreof 1/4 SAETA230EV-55/8 tube insert part x 1/4 SAE with Corewithout welding copper tube.◆Connecting mounting screw size...7/16-20UNF (1/4 SAE Male Screw)◆Valve structure...built-in valve for refrigerant1 Piece◆Maximum working pressure...4MPa◆Fitting material...Brass◆Seal material...CR (Chloroprene Rubber)1/4 SAEwith Valve CoreWithout extra process, you can connect copper pipes directly,enabling enhanced utility.Furthermore, easy to work in narrow space.Fitting equipped with built-in refrigerant service valve.Usage1 Check pipe appearance2 Insert pipe3 Completing tighten pipeEnsures stable flow of gas and prevents leakage while disassemblingclamp.◆◆Feature...Can make 1/4 SAE Service Port without welding copper tube.Usage◆Airtight test and pressure test for air conditioner◆Airtight test and pressure test for refrigerator◆Airtight test for soldering partsBe sure that there are noscratches , burrs and abnormalinsertion of the part of thetube.Scratch or burrs may lead toleakage.Without removing the nut,insert pipe until the pipe endfits the main body.After inserting tube , tightennut lightly until pipe is notsipped by hand.After tightening the nut lightly, use spanner/wrench to tightennut until nut end fits andtouches the main body.Tube connection is completed.25